Forum Announcements

Contact Informaton: ...Email: eaglesinternational.email@gmail.com .... Text: three zero three 478-3501
NOTEL These contacts will not address technical questions -- that is what this forum is for.

Registration to the forum is open to the public (*) and free from any cost or obligation.
Link to the registration form: ucp.php?mode=register. Please allow up to 36 hours for your application to be processed. If you have any problems registering, please contact us via the contact information above.
(*) spambots will be deleted-- only legitimate public applications will be processed

As of 11/6/2024 the forum software platform is the latest version. This process is documented in this thread: viewtopic.php?t=5096

Update 11/13/2024: While the forum had significant interruptions during the software update project, no problems have been reported or detected in the past few days.

Reminder: the "quick links" menu offers you the best navigation of this forum -- you need to be registered and logged in to see that menu.

Rickyoday's 1982 Model 10

This is a public forum. This forum will be a place to show your Project Eagle and updates on progress you have made. Please make one thread with your project and put all updates in the same thread. Sorry... Eagles only.
User avatar
beltguy
Site Admin
Site Admin
Posts: 2719
Joined: Wed Oct 08, 2008 4:39 am
FMCA #: F246286
Bus Model: 1985 Eagle 10 with Series 60 and Eaton AutoShift 10 speed transmission (SOLD)
Location: Evergreen, CO
Contact:

Re: Rickyoday's 1982 Model 10

Post by beltguy »

Rick, it looks like they did a great job on the hitch.  I am anal about loosing a car/trailer, so I run safety chains from the further up on the engine rails to the center of the hitch so that the car/trailer chains connect with both the hitch and the auxiliary safety chains. 

Very interesting exhaust design.

Jim
Jim Shepherd
Evergreen, CO
'85 Eagle 10 with Series 60 & Eaton AutoShift 10 speed transmission SOLD
2005 Dodge 2500 with 5.9 Cummins and 6 speed manual 2022 Sunset 28 foot trailer
Bus Project pages: http://beltguy.com/Bus_Project/busproject.htm
Blog: https://beltguy.com/Travelogue/
Email: eaglesinternational.email at gmail.com   Technical questions sent to this email address will not receive a response - that is what this forum is for.
Rickyoday
Posts: 29
Joined: Thu Dec 01, 2016 5:35 pm
Bus Model: 1982 Eagle Model 10
Location: Leola, Pennsylvania

Re: Rickyoday's 1982 Model 10

Post by Rickyoday »

Hi Rusty,
  I got the LED bulbs from SuperBrightLEDs.com  https://www.superbrightleds.com/?msclki ... 2029fb596e
   They are direct replacements for the standard incandescent bulbs.  They are definitely brighter than the regular bulbs, but not as bright as I had hoped.  Of course if I was willing to pay more then I would have the "SuperBright LEDs"!
Rick Oday
1982 Eagle Model 10 Stealth RV Conversion
Rickyoday
Posts: 29
Joined: Thu Dec 01, 2016 5:35 pm
Bus Model: 1982 Eagle Model 10
Location: Leola, Pennsylvania

Re: Rickyoday's 1982 Model 10

Post by Rickyoday »

Hi Jim,
  I agree about worrying about the 'toad', I can't afford to replace the Jeep if it went astray!  The exhaust system is different, isn't It? I've noticed that most of the Eagles seem to have very individual designs.  I would love to have it exhaust out the top of the bus, or to the left, because it's blowing right on the jeep!  I did buy a 'Toad' protector from Blue Ox that attaches to the front of the Jeep...I'll post pics of that this week.(It has to be assembled.)
Rick
Rick Oday
1982 Eagle Model 10 Stealth RV Conversion
User avatar
DoubleEagle
Club Member
Club Member
Posts: 286
Joined: Wed Feb 14, 2018 9:26 pm
Bus Model: 1975 Model 05 Eagle
1982 Model 10 Eagle
1984 Model 10 Eagle
1994 Model 15-45 Eagle
Location: Dayton, Ohio

Re: Rickyoday's 1982 Model 10

Post by DoubleEagle »

Rick,

The hitch looks strong enough, maybe heavier than needed, and it looks like it was welded to the frame. If the engine was to be slid out, would the miter box and oil pan clear the hitch? The exhaust setup on your bus was just used for a couple years on Eagles (along with the air intake scoop). You don't have to continue with the way it was originally. I would eliminate the rectangular tip and run the round pipe to the driver side. Then you could see your exhaust in the mirror and your towed vehicle won't be smoke basted, guard or no-guard. The hitch will be the lowest item on the rear, and will be the first thing to drag on uneven ground. You might need a skid plate or wheels to avoid getting hung up, if you go to rough campgrounds or severe pavement dips leading into business entrances (some of the places in Branson, Missouri are bad for this).

Your destination sign looks good, I used the EXPRESS sign on my Model 05 all over the country back in the nineties. The only problem was people asking me where I was going, and if they could buy a ticket. Having all the windows still in adds to that effect.
Walter
Dayton, Ohio
1975 Silvereagle Model 05, 8V71, 4 speed Spicer
1982 Eagle Model 10, 6V92, 5 speed Spicer
1984 Eagle Model 10, 6V92 w/Jacobs, Allison HT740
1994 Eagle Model 15-45, Series 60 w/Jacobs, Allison HT746
Post Reply