Forum Announcements
Contact Informaton: ...Email: eaglesinternational.email@gmail.com .... Text: three zero three 478-3501
NOTEL These contacts will not address technical questions -- that is what this forum is for.
Registration to the forum is open to the public (*) and free from any cost or obligation. Link to the registration form: ucp.php?mode=register. Please allow up to 36 hours for your application to be processed. If you have any problems registering, please contact us via the contact information above.
(*) spambots will be deleted-- only legitimate public applications will be processed
As of 11/6/2024 the forum software platform is the latest version. The frustrating updating process is documented in this thread: viewtopic.php?t=5096
Update 1/3/2025: Happy New Year. No problems have been reported or detected.
Reminder: the "quick links" menu offers you the best navigation of this forum -- you need to be registered and logged in to see that menu.
Contact Informaton: ...Email: eaglesinternational.email@gmail.com .... Text: three zero three 478-3501
NOTEL These contacts will not address technical questions -- that is what this forum is for.
Registration to the forum is open to the public (*) and free from any cost or obligation. Link to the registration form: ucp.php?mode=register. Please allow up to 36 hours for your application to be processed. If you have any problems registering, please contact us via the contact information above.
(*) spambots will be deleted-- only legitimate public applications will be processed
As of 11/6/2024 the forum software platform is the latest version. The frustrating updating process is documented in this thread: viewtopic.php?t=5096
Update 1/3/2025: Happy New Year. No problems have been reported or detected.
Reminder: the "quick links" menu offers you the best navigation of this forum -- you need to be registered and logged in to see that menu.
Manny & Darlene's Eagle 05
- buscrazyinFL
- Club Member
- Posts: 655
- Joined: Tue Nov 04, 2008 8:47 pm
- FMCA #: F385289
- Bus Model: 1972 Eagle 05
Vin # 8851 - Location: Winter Haven, FL
Re: Manny & Darlene's Eagle 05
It has a 64gb memory card I think it records like two hrs. No I haven't made a key for a model 15 gas cap.
Manny & Darlene's
1972 Silver Eagle 05
VIN # 8851
8V71 / HT740 4 Speed Automatic
1972 Silver Eagle 05
VIN # 8851
8V71 / HT740 4 Speed Automatic
- buscrazyinFL
- Club Member
- Posts: 655
- Joined: Tue Nov 04, 2008 8:47 pm
- FMCA #: F385289
- Bus Model: 1972 Eagle 05
Vin # 8851 - Location: Winter Haven, FL
Re: Manny & Darlene's Eagle 05
POST # 64
Replacing the Side View Mirror Base
The Chrome plating was pitting so it was time to replace these bases.
Of course it wasn't as easy as I had hoped. Took about 3 hours to do.
Btw, these bases are not cheap.
Replacing the Side View Mirror Base
The Chrome plating was pitting so it was time to replace these bases.
Of course it wasn't as easy as I had hoped. Took about 3 hours to do.
Btw, these bases are not cheap.
Manny & Darlene's
1972 Silver Eagle 05
VIN # 8851
8V71 / HT740 4 Speed Automatic
1972 Silver Eagle 05
VIN # 8851
8V71 / HT740 4 Speed Automatic
- buscrazyinFL
- Club Member
- Posts: 655
- Joined: Tue Nov 04, 2008 8:47 pm
- FMCA #: F385289
- Bus Model: 1972 Eagle 05
Vin # 8851 - Location: Winter Haven, FL
Re: Manny & Darlene's Eagle 05
POST # 65
ELECTRIC PANEL DOOR
I never did like the two doors on the Electrical Panel, so I finally got it switched to one door.
I really like the way it turned out.
ELECTRIC PANEL DOOR
I never did like the two doors on the Electrical Panel, so I finally got it switched to one door.
I really like the way it turned out.
Manny & Darlene's
1972 Silver Eagle 05
VIN # 8851
8V71 / HT740 4 Speed Automatic
1972 Silver Eagle 05
VIN # 8851
8V71 / HT740 4 Speed Automatic
- beltguy
- Site Admin
- Posts: 2726
- Joined: Wed Oct 08, 2008 4:39 am
- FMCA #: F246286
- Bus Model: 1985 Eagle 10 with Series 60 and Eaton AutoShift 10 speed transmission (SOLD)
- Location: Evergreen, CO
- Contact:
Re: Manny & Darlene's Eagle 05
Manny, thanks for the update. I am always blasted away by your attention to detail and fabrication skills!!
Jim Shepherd
Evergreen, CO
'85 Eagle 10 with Series 60 & Eaton AutoShift 10 speed transmission SOLD
2005 Dodge 2500 with 5.9 Cummins and 6 speed manual 2022 Sunset 28 foot trailer
Bus Project pages: http://beltguy.com/Bus_Project/busproject.htm
Blog: https://beltguy.com/Travelogue/
Email: eaglesinternational.email at gmail.com Technical questions sent to this email address will not receive a response - that is what this forum is for.
Evergreen, CO
'85 Eagle 10 with Series 60 & Eaton AutoShift 10 speed transmission SOLD
2005 Dodge 2500 with 5.9 Cummins and 6 speed manual 2022 Sunset 28 foot trailer
Bus Project pages: http://beltguy.com/Bus_Project/busproject.htm
Blog: https://beltguy.com/Travelogue/
Email: eaglesinternational.email at gmail.com Technical questions sent to this email address will not receive a response - that is what this forum is for.
- buscrazyinFL
- Club Member
- Posts: 655
- Joined: Tue Nov 04, 2008 8:47 pm
- FMCA #: F385289
- Bus Model: 1972 Eagle 05
Vin # 8851 - Location: Winter Haven, FL
Re: Manny & Darlene's Eagle 05
Thanks Jim we have more pics to post.
Manny & Darlene's
1972 Silver Eagle 05
VIN # 8851
8V71 / HT740 4 Speed Automatic
1972 Silver Eagle 05
VIN # 8851
8V71 / HT740 4 Speed Automatic
- rusty
- Moderator
- Posts: 1563
- Joined: Thu Oct 09, 2008 3:22 pm
- FMCA #: F341087
- Bus Model: 1972 05 completed 2003
1994 15/45 in progress - Location: Johnstown Co.
Re: Manny & Darlene's Eagle 05
Manny, That sure cleans things up with the 2 doors to one. Nice job
Wayne
Wayne
- buscrazyinFL
- Club Member
- Posts: 655
- Joined: Tue Nov 04, 2008 8:47 pm
- FMCA #: F385289
- Bus Model: 1972 Eagle 05
Vin # 8851 - Location: Winter Haven, FL
Re: Manny & Darlene's Eagle 05
POST # 66
A NEW LOOK
Our bus was professionally converted by Hercules Coach in KY back in 1988. They did a pretty good job, but we had grown weary of the old tile the carpet in the front entrance of the bus...we wanted a fresh, new look. We had been thinking about doing this for the past couple years, but we knew it was going to be quite a job and we really didn't have the time to deal with it until now. So last year when we had the backsplash put in the kitchen area we asked our tile man for a quote...which seemed very fair and doable. Next we had to decide on which tile. After many trips to Home Depot and Lowes and after buying and trying several different patterns and styles we found what we wanted.
It was my job to take out all the old tile, which came up pretty easily, but even so - that took about 2 full days. Then I had to take up a sub floor that was below the tile, then I also had to scrape off the old glue. Most of the flooring beneath all this was in great condition, but there were some areas that needed new plywood - such as in the hallway where there was previously carpet and in the bathroom. The bathroom had tiny tiles and a very poor subfloor. It wasn't even level, so that in itself was quite a project. Working on the hall and the bathroom took another two full days.
My wife and I decided as long as we were this far along with a remake of our interior that we wanted to replace the bottom half of the interior side walls which was a felt-like upholstery material that was discolored and dirty and really needed a facelift. We decided on Wainscoting. Removing the old felt material wasn't too bad until we reached one section under the window where there must have been a leak at one time. That wood was rotten. I replaced that. The water apparently ran from there to behind the driver's seat where I found a piece of metal that had some pretty bad surface rust, so I cleaned that up and treated it with Rust Bullet. Then I had to rebuild that area with new wood. It took me about 2-3 days to do all this and install the new Wainscoting which looks REALLY GOOD!!!
You will also notice in the driver's area on the floor, when I removed the old carpet that had been there I found holes where other seats had been mounted through the years and where the old shifter use to be and no one bothered to cover those holes...so I took care of all of that. Now everything there is sealed with new wood and was made level for tile.
We decided to put Johnsonite Rubber Stair Treads on the first two steps coming into the bus which I bought through a company called Koffler. We've seen this on the newer High-End RVs and Prevosts. We liked the look and felt it was safer option, especially with our grandkids (or anyone for that matter) stepping into the bus.
We are so happy with the end result! Our tile man (who has over 30 years of experience) did an excellent job. It took him 26 to lay the tile. I was amazed that he took about 3 hours to measure and form the lines prior to laying the tile. I was the official string holder. Once he that done, most of the tile went down pretty quickly (one day), until he got to the entrance. That was tedious and he's a perfectionist, but it turned out great!
This was the third largest improvement we've made to our Eagle since we got it. The first was replacing the engine (which I did myself along with Gary and Eric), and then having the front end rebuilt by JB.
(I will have to spread out the pics as each post only allows 8 per post).
A NEW LOOK
Our bus was professionally converted by Hercules Coach in KY back in 1988. They did a pretty good job, but we had grown weary of the old tile the carpet in the front entrance of the bus...we wanted a fresh, new look. We had been thinking about doing this for the past couple years, but we knew it was going to be quite a job and we really didn't have the time to deal with it until now. So last year when we had the backsplash put in the kitchen area we asked our tile man for a quote...which seemed very fair and doable. Next we had to decide on which tile. After many trips to Home Depot and Lowes and after buying and trying several different patterns and styles we found what we wanted.
It was my job to take out all the old tile, which came up pretty easily, but even so - that took about 2 full days. Then I had to take up a sub floor that was below the tile, then I also had to scrape off the old glue. Most of the flooring beneath all this was in great condition, but there were some areas that needed new plywood - such as in the hallway where there was previously carpet and in the bathroom. The bathroom had tiny tiles and a very poor subfloor. It wasn't even level, so that in itself was quite a project. Working on the hall and the bathroom took another two full days.
My wife and I decided as long as we were this far along with a remake of our interior that we wanted to replace the bottom half of the interior side walls which was a felt-like upholstery material that was discolored and dirty and really needed a facelift. We decided on Wainscoting. Removing the old felt material wasn't too bad until we reached one section under the window where there must have been a leak at one time. That wood was rotten. I replaced that. The water apparently ran from there to behind the driver's seat where I found a piece of metal that had some pretty bad surface rust, so I cleaned that up and treated it with Rust Bullet. Then I had to rebuild that area with new wood. It took me about 2-3 days to do all this and install the new Wainscoting which looks REALLY GOOD!!!
You will also notice in the driver's area on the floor, when I removed the old carpet that had been there I found holes where other seats had been mounted through the years and where the old shifter use to be and no one bothered to cover those holes...so I took care of all of that. Now everything there is sealed with new wood and was made level for tile.
We decided to put Johnsonite Rubber Stair Treads on the first two steps coming into the bus which I bought through a company called Koffler. We've seen this on the newer High-End RVs and Prevosts. We liked the look and felt it was safer option, especially with our grandkids (or anyone for that matter) stepping into the bus.
We are so happy with the end result! Our tile man (who has over 30 years of experience) did an excellent job. It took him 26 to lay the tile. I was amazed that he took about 3 hours to measure and form the lines prior to laying the tile. I was the official string holder. Once he that done, most of the tile went down pretty quickly (one day), until he got to the entrance. That was tedious and he's a perfectionist, but it turned out great!
This was the third largest improvement we've made to our Eagle since we got it. The first was replacing the engine (which I did myself along with Gary and Eric), and then having the front end rebuilt by JB.
(I will have to spread out the pics as each post only allows 8 per post).
Manny & Darlene's
1972 Silver Eagle 05
VIN # 8851
8V71 / HT740 4 Speed Automatic
1972 Silver Eagle 05
VIN # 8851
8V71 / HT740 4 Speed Automatic
- buscrazyinFL
- Club Member
- Posts: 655
- Joined: Tue Nov 04, 2008 8:47 pm
- FMCA #: F385289
- Bus Model: 1972 Eagle 05
Vin # 8851 - Location: Winter Haven, FL
Re: Manny & Darlene's Eagle 05
Tile Project Continued...
One picture shows the mortar our tile man used. He highly recommends this mortar and has used it for years.
One picture shows the mortar our tile man used. He highly recommends this mortar and has used it for years.
Manny & Darlene's
1972 Silver Eagle 05
VIN # 8851
8V71 / HT740 4 Speed Automatic
1972 Silver Eagle 05
VIN # 8851
8V71 / HT740 4 Speed Automatic
- buscrazyinFL
- Club Member
- Posts: 655
- Joined: Tue Nov 04, 2008 8:47 pm
- FMCA #: F385289
- Bus Model: 1972 Eagle 05
Vin # 8851 - Location: Winter Haven, FL
Re: Manny & Darlene's Eagle 05
More Tile Project Pics...
I forgot to mention that we decided to go with a Staggered Pattern instead of Diagonal, first because we have noticed it in the newer, high-end Motor Homes and secondly because there was much less waste and that meant less time and less money. Our tile man recommended that we use Porcelain Tile as opposed to Ceramic Tile or even Stone Tile because of its durability, and we went with a darker grout (Light Smoke) which he also recommended. I put two coats of sealer on the grout...that was super easy to do.
I forgot to mention that we decided to go with a Staggered Pattern instead of Diagonal, first because we have noticed it in the newer, high-end Motor Homes and secondly because there was much less waste and that meant less time and less money. Our tile man recommended that we use Porcelain Tile as opposed to Ceramic Tile or even Stone Tile because of its durability, and we went with a darker grout (Light Smoke) which he also recommended. I put two coats of sealer on the grout...that was super easy to do.
Manny & Darlene's
1972 Silver Eagle 05
VIN # 8851
8V71 / HT740 4 Speed Automatic
1972 Silver Eagle 05
VIN # 8851
8V71 / HT740 4 Speed Automatic
- buscrazyinFL
- Club Member
- Posts: 655
- Joined: Tue Nov 04, 2008 8:47 pm
- FMCA #: F385289
- Bus Model: 1972 Eagle 05
Vin # 8851 - Location: Winter Haven, FL
Re: Manny & Darlene's Eagle 05
Here are some pictures of the remake to the Interior Walls
The first two pics will give you an idea of what was on the walls before.
The first two pics will give you an idea of what was on the walls before.
Manny & Darlene's
1972 Silver Eagle 05
VIN # 8851
8V71 / HT740 4 Speed Automatic
1972 Silver Eagle 05
VIN # 8851
8V71 / HT740 4 Speed Automatic