Forum Announcements

Contact Informaton: ...Email: eaglesinternational.email@gmail.com .... Text: three zero three 478-3501

I will be rebuilding this announcement block in the next day or so.

While our platform software is the latest version, it would seem that we still have a less than robust site.

During attempts to resolve issues, other problems occur. The latest was a failure to accept passwords. It appears that had been resolve.

My apologies for all the problems.

Dreamscape 1968 Eagle 01

This is a public forum. This forum will be a place to show your Project Eagle and updates on progress you have made. Please make one thread with your project and put all updates in the same thread. Sorry... Eagles only.
Post Reply
User avatar
Dreamscape
Posts: 3046
Joined: Mon Oct 13, 2008 1:03 pm
FMCA #: F391238
Bus Model: 1968 Silver Eagle Model 01
Location: Full Timing - On The Road

Re: Dreamscape 1968 Eagle 01

Post by Dreamscape »

Andy, That's probably were the sweet spot is. I'm guessing that it could be different on each installation due to any modifications that are made. There are several out there that don't even use a regulator, Sonnie is a good example.
Paul Lawry
Dreamscape
1968 Eagle 01 #7443
Silver 8V92 HT 740

Dreamscape Build Blog: https://dreamscapesilvereagle.wordpress.com/
User avatar
luvrbus
Club Member
Club Member
Posts: 2982
Joined: Mon Oct 13, 2008 12:50 pm
FMCA #: F262917
Bus Model: 05

Re: Dreamscape 1968 Eagle 01

Post by luvrbus »

I still think you have to much linkage and the pod is mounted in the wrong place no regulator may be better for you

Doyle s works good it is mount up on the front of the engine a rod and bell crank that's it

Sonnies engine air throttle works off the injection pump not the governor like on a DD a totally different a animal

Clifford
User avatar
Dreamscape
Posts: 3046
Joined: Mon Oct 13, 2008 1:03 pm
FMCA #: F391238
Bus Model: 1968 Silver Eagle Model 01
Location: Full Timing - On The Road

Re: Dreamscape 1968 Eagle 01

Post by Dreamscape »

I wanted to wait to respond to Cliff's post after another trip. We drove down to Crater Lake RV Park from Salem last Tuesday. I left the regulator at 100#, the throttle worked great. I know I have more linkage than most, but it works. I may change the method at a later date, or just leave it alone....................I'll leave it alone. ;)

I'm pleased to report that after that journey all has worked very well. Engine/tranny temp never got over 190 on the big pulls. No leaks and all is well. I know the ambient temp was only 70 or so, but I'm still pleased! 8-)

Shifting down on the big pulls was a snap, just moved my wrist! With the old crash box, my mood wasn't the best! :lol:
Paul Lawry
Dreamscape
1968 Eagle 01 #7443
Silver 8V92 HT 740

Dreamscape Build Blog: https://dreamscapesilvereagle.wordpress.com/
User avatar
Dreamscape
Posts: 3046
Joined: Mon Oct 13, 2008 1:03 pm
FMCA #: F391238
Bus Model: 1968 Silver Eagle Model 01
Location: Full Timing - On The Road

Re: Dreamscape 1968 Eagle 01

Post by Dreamscape »

I installed a set of air bag frames to help support the bus over the rear axle. I tested it at 40 psi on a 300 mile trip and could not believe how much better the old gal rides. They are tied to a simple regulator for now. I do plan to install separate valves for leveling at a later date. One side is a little higher than the other, which is the way it was before I tackled this job.

Next project is to add a gauge to my hydraulic jack so I can set up the suspension properly.

It raised the rear of the coach approximately 2 ", which was my goal.

I'm sure there is a better way to do this project, it's just my way of what I did.

Image

Image
Paul Lawry
Dreamscape
1968 Eagle 01 #7443
Silver 8V92 HT 740

Dreamscape Build Blog: https://dreamscapesilvereagle.wordpress.com/
User avatar
Eagle Andy
Club Member
Club Member
Posts: 1024
Joined: Tue Oct 14, 2008 4:37 pm
FMCA #: F299044
Bus Model: 1968 SE Model 05
Location: Miles city Mt

Re: Dreamscape 1968 Eagle 01

Post by Eagle Andy »

Looks good Paul, and as long as it works :) I take my hat off to you for tackling such a big job.
Andy Wright 68 Silver Eagle Model 5 8V92 #7481
User avatar
akroyaleagle
Club Member
Club Member
Posts: 486
Joined: Tue Oct 14, 2008 12:11 pm
FMCA #: F180747
Bus Model: 1978 Model 05
Location: Sioux Falls, SD

Re: Dreamscape 1968 Eagle 01

Post by akroyaleagle »

It looks great paul.

I've never needed them, but I think they are the answer for some folks, especially the 01s.
Joe Laird
'78 05
Sioux Falls, SD
User avatar
Dreamscape
Posts: 3046
Joined: Mon Oct 13, 2008 1:03 pm
FMCA #: F391238
Bus Model: 1968 Silver Eagle Model 01
Location: Full Timing - On The Road

Re: Dreamscape 1968 Eagle 01

Post by Dreamscape »

Thanks guys! 8-)

I wish I could have taken the time to clean and paint the area properly. It took a bunch of hours just to get done what I did. I guess that's another project for another time ;) !
Paul Lawry
Dreamscape
1968 Eagle 01 #7443
Silver 8V92 HT 740

Dreamscape Build Blog: https://dreamscapesilvereagle.wordpress.com/
User avatar
rusty
Moderator
Moderator
Posts: 1562
Joined: Thu Oct 09, 2008 3:22 pm
FMCA #: F341087
Bus Model: 1972 05 completed 2003
1994 15/45 in progress
Location: Johnstown Co.

Re: Dreamscape 1968 Eagle 01

Post by rusty »

Nice job Paul. Do you have the part number of that air bag?

Wayne
User avatar
Gary LaBombard
Club Member
Club Member
Posts: 516
Joined: Tue Oct 14, 2008 7:29 am
FMCA #: F185090
Bus Model: 1973 Model 05 Eagle
Location: Piedmont, SC
Contact:

Re: Dreamscape 1968 Eagle 01

Post by Gary LaBombard »

HI Paul,
Great job on the air bag even your way. I agree with Rusty; do you have the part number for the air bag you used, is looks like a perfect fit.
Gary
Owner of the "Rustless Money Pit" 1973 Model 05 Eagle.
http://busconverter101.com for instructional video
Eaglesinternational bb'd best site for Eagle owners to receive information.
User avatar
Dreamscape
Posts: 3046
Joined: Mon Oct 13, 2008 1:03 pm
FMCA #: F391238
Bus Model: 1968 Silver Eagle Model 01
Location: Full Timing - On The Road

Re: Dreamscape 1968 Eagle 01

Post by Dreamscape »

Here is the link to the Firestone air spring I used.

http://www.firestoneip.com/site-resourc ... 589293.pdf" onclick="window.open(this.href);return false;
Paul Lawry
Dreamscape
1968 Eagle 01 #7443
Silver 8V92 HT 740

Dreamscape Build Blog: https://dreamscapesilvereagle.wordpress.com/
Post Reply