Announcement Block
As of 12/1/2021, a major update of the forum software was accomplished
Update: 3/7/2024: The Eagles email account at GoDaddy no longer works. I have set up a gmail account as a workaround: eaglesinternational.email at gmail.com
Registration is open to the public (*) and free from any cost or obligation. Please allow up to 36 hours for your application to be processed. If you have problems registering, please email me at: eaglesinternational.email at gmail.com
(*) spambots will be deleted -- only legitimate public applications will be processed.
Reminder: the "quick links" menu offers you the best navigation of this forum -- you need to be registered and logged in to see that menu.
As of 12/1/2021, a major update of the forum software was accomplished
Update: 3/7/2024: The Eagles email account at GoDaddy no longer works. I have set up a gmail account as a workaround: eaglesinternational.email at gmail.com
Registration is open to the public (*) and free from any cost or obligation. Please allow up to 36 hours for your application to be processed. If you have problems registering, please email me at: eaglesinternational.email at gmail.com
(*) spambots will be deleted -- only legitimate public applications will be processed.
Reminder: the "quick links" menu offers you the best navigation of this forum -- you need to be registered and logged in to see that menu.
Mason's 1968 model 05
-
- Posts: 322
- Joined: Thu Jun 14, 2018 11:37 am
- Bus Model: 1968 model 05 Eagle series 60 and B500
- Location: McCook NE
Re: Mason's 1968 model 05
Hoping someone will help me here. I believe Wayne made his own fuel tank? Is this a good idea?
1968 05 Series 60/B500 swap 2019-2021
1971 05 8v71 Spicer 4 speed parts bus
1971 05 8v71 Spicer 4 speed parts bus
- beltguy
- Site Admin
- Posts: 2663
- Joined: Wed Oct 08, 2008 4:39 am
- FMCA #: F246286
- Bus Model: 1985 Eagle 10 with Series 60 and Eaton AutoShift 10 speed transmission (SOLD)
- Location: Evergreen, CO
- Contact:
Re: Mason's 1968 model 05
Hi Mason
I made my auxiliary fuel tank to supply fuel to my Aqua-Hot and generator. Since the tank was separate, I had the option to use red fuel. I plumbed it so that I could use it as an emergency tank for the engine if necessary.
I used sheet steel (1/8" I think) and welded it on both the inside and outside and then welded the top on. Worked very well.
The great thing about making your own tank is that you can get maximum capacity for the space available. If the tank is big enough, you may want to add baffles to keep fuel slosh down a bit.
You are good with fabrication, so you should have no problem.
Jim
I made my auxiliary fuel tank to supply fuel to my Aqua-Hot and generator. Since the tank was separate, I had the option to use red fuel. I plumbed it so that I could use it as an emergency tank for the engine if necessary.
I used sheet steel (1/8" I think) and welded it on both the inside and outside and then welded the top on. Worked very well.
The great thing about making your own tank is that you can get maximum capacity for the space available. If the tank is big enough, you may want to add baffles to keep fuel slosh down a bit.
You are good with fabrication, so you should have no problem.
Jim
Jim Shepherd
Evergreen, CO
'85 Eagle 10 with Series 60 & Eaton AutoShift 10 speed transmission SOLD
2005 Dodge 2500 with 5.9 Cummins and 6 speed manual 2022 Sunset 28 foot trailer
Bus Project pages: http://beltguy.com/Bus_Project/busproject.htm
Blog: https://beltguy.com/Travelogue/
Email: eaglesinternational.email at gmail.com NOTE this email box is only for general correspondence related to the forum and not technical advice. Technical questions will not receive a response.
Evergreen, CO
'85 Eagle 10 with Series 60 & Eaton AutoShift 10 speed transmission SOLD
2005 Dodge 2500 with 5.9 Cummins and 6 speed manual 2022 Sunset 28 foot trailer
Bus Project pages: http://beltguy.com/Bus_Project/busproject.htm
Blog: https://beltguy.com/Travelogue/
Email: eaglesinternational.email at gmail.com NOTE this email box is only for general correspondence related to the forum and not technical advice. Technical questions will not receive a response.
-
- Posts: 322
- Joined: Thu Jun 14, 2018 11:37 am
- Bus Model: 1968 model 05 Eagle series 60 and B500
- Location: McCook NE
Re: Mason's 1968 model 05
Thanks for the reply Jim. My stock tanks are giving me fits. Only allow me to put a small diesel pump on the first click on one side. I want it so I can put a semi pump on 1 side full bore. Right now we are just using about 50 gallons because after it gets 80 gallons in tank it refuses to fill. Math says it should fit 200 with middle tank. My thoughts are take out 3 individual tanks and install 1 tank. I have the tanks from the bluebird, so I can modify that one or start from scratch....
1968 05 Series 60/B500 swap 2019-2021
1971 05 8v71 Spicer 4 speed parts bus
1971 05 8v71 Spicer 4 speed parts bus
- rusty
- Moderator
- Posts: 1546
- Joined: Thu Oct 09, 2008 3:22 pm
- FMCA #: F341087
- Bus Model: 1972 05 completed 2003
1994 15/45 in progress - Location: Johnstown Co.
Re: Mason's 1968 model 05
Yes Mason I made my own. I used 1/8 stainless. I don't think you need stainless. I suggest you break one edge of the seam to be welded so you will on the radius not a straight edge you get way better welds and it is stronger.
Wayne
Wayne
- beltguy
- Site Admin
- Posts: 2663
- Joined: Wed Oct 08, 2008 4:39 am
- FMCA #: F246286
- Bus Model: 1985 Eagle 10 with Series 60 and Eaton AutoShift 10 speed transmission (SOLD)
- Location: Evergreen, CO
- Contact:
Re: Mason's 1968 model 05
I have been enjoying a YouTube video series about a guy building an RV using a semi front cab/engine/frame and then everything else is custom. His great information and humor is very enjoyable. In the link below, he builds a very large fuel tank. Lots of good information.
https://www.youtube.com/watch?v=5OnSWJ3kGuA&t=43s
BTW, his generator is very interesting. It uses a 3V-53 to power both a 300 amp DC generator as well as a huge AC generator:
https://www.youtube.com/watch?v=0aOKI2zLzFo
Note: on at least one of the above videos you will need to back them up to see it from the start.
Jim
https://www.youtube.com/watch?v=5OnSWJ3kGuA&t=43s
BTW, his generator is very interesting. It uses a 3V-53 to power both a 300 amp DC generator as well as a huge AC generator:
https://www.youtube.com/watch?v=0aOKI2zLzFo
Note: on at least one of the above videos you will need to back them up to see it from the start.
Jim
Jim Shepherd
Evergreen, CO
'85 Eagle 10 with Series 60 & Eaton AutoShift 10 speed transmission SOLD
2005 Dodge 2500 with 5.9 Cummins and 6 speed manual 2022 Sunset 28 foot trailer
Bus Project pages: http://beltguy.com/Bus_Project/busproject.htm
Blog: https://beltguy.com/Travelogue/
Email: eaglesinternational.email at gmail.com NOTE this email box is only for general correspondence related to the forum and not technical advice. Technical questions will not receive a response.
Evergreen, CO
'85 Eagle 10 with Series 60 & Eaton AutoShift 10 speed transmission SOLD
2005 Dodge 2500 with 5.9 Cummins and 6 speed manual 2022 Sunset 28 foot trailer
Bus Project pages: http://beltguy.com/Bus_Project/busproject.htm
Blog: https://beltguy.com/Travelogue/
Email: eaglesinternational.email at gmail.com NOTE this email box is only for general correspondence related to the forum and not technical advice. Technical questions will not receive a response.
-
- Posts: 322
- Joined: Thu Jun 14, 2018 11:37 am
- Bus Model: 1968 model 05 Eagle series 60 and B500
- Location: McCook NE
Re: Mason's 1968 model 05
Thanks Wayne and Jim. Wayne I don’t have a brake... I really think I’ll be fine without one. Looks like a very simple process to build a tank. That and I have the bluebird tank to copy. So this should be pretty easy right?
might even get started today lol. Been to long... busy busy summer here
![Smile :)](./images/smilies/icon_e_smile.gif)
1968 05 Series 60/B500 swap 2019-2021
1971 05 8v71 Spicer 4 speed parts bus
1971 05 8v71 Spicer 4 speed parts bus
-
- Posts: 322
- Joined: Thu Jun 14, 2018 11:37 am
- Bus Model: 1968 model 05 Eagle series 60 and B500
- Location: McCook NE
Re: Mason's 1968 model 05
I did get the bluebird fuel tank pulled. the manual says to pull it straight out the bottom. meanwhile the bus is sinking into the grass... and speaking of which with all that dead grass i was afraid to make sparks. so sawzall and cordless bandsaw it was. moved a few members with my trusty side kick aka chain hoist. felt slightly redneck
hoping i can use some things from this tank otherwise ill just be using it as a template of sorts to build my tank.
![Confused :?](./images/smilies/icon_e_confused.gif)
1968 05 Series 60/B500 swap 2019-2021
1971 05 8v71 Spicer 4 speed parts bus
1971 05 8v71 Spicer 4 speed parts bus
-
- Posts: 322
- Joined: Thu Jun 14, 2018 11:37 am
- Bus Model: 1968 model 05 Eagle series 60 and B500
- Location: McCook NE
Re: Mason's 1968 model 05
oh ya. iphone problems.
1968 05 Series 60/B500 swap 2019-2021
1971 05 8v71 Spicer 4 speed parts bus
1971 05 8v71 Spicer 4 speed parts bus
-
- Posts: 322
- Joined: Thu Jun 14, 2018 11:37 am
- Bus Model: 1968 model 05 Eagle series 60 and B500
- Location: McCook NE
Re: Mason's 1968 model 05
Got um. Now the fun begins....
1968 05 Series 60/B500 swap 2019-2021
1971 05 8v71 Spicer 4 speed parts bus
1971 05 8v71 Spicer 4 speed parts bus
-
- Posts: 322
- Joined: Thu Jun 14, 2018 11:37 am
- Bus Model: 1968 model 05 Eagle series 60 and B500
- Location: McCook NE
Re: Mason's 1968 model 05
$$$500 later lol
1968 05 Series 60/B500 swap 2019-2021
1971 05 8v71 Spicer 4 speed parts bus
1971 05 8v71 Spicer 4 speed parts bus