Page 1 of 1
M&G braking system for a jeep liberty
Posted: Wed Sep 16, 2015 7:09 am
by rusty
Carol Gourley asked me to take the M & G braking system off of the Liberty they pulled behind the bus. Also I have the mounting hardware for a roadmaster tow bar. ( I am pretty sure it is roadmaster ). Any how if you need any of this stuff make an offer.
Wayne
303-591-0372
Re: M&G braking system for a jeep liberty
Posted: Thu Sep 17, 2015 7:18 am
by beltguy
For those of you not familiar with the M&G brake system, I consider it to be the best brake system - by far. Once installed, there is no hardware to fool with. Simply hook up the air connection (connected to the air brake system on the bus).
Depending on the year of the Liberty, the model is either a 102 or 602. You can check compatibility here
http://m-gengineering.com/Compatibility.html
Jim
Re: M&G braking system for a jeep liberty
Posted: Thu Sep 17, 2015 10:29 am
by gpzzdrm
I love mine. I believe components are transferable from one vehicle to another, except for the brake master cylinder module. It has been awhile, but M&G was very cooperative on exchange of one for another back when I changed vehicles and needed to change mine. The exchange I made was one new unit for another. Not a used one. I just changed vehicles after I bought it but before I installed it.