SOLD Miller MIG welder
Posted: Sat Aug 09, 2014 12:59 pm
Hello, Eagle Bus Folks, --
This post is on craigslist Monterey Bay CA. A remarkable bargain for someone at $999. If you want it, let me know and come and get it. About a year ago, I checked shipping it via 'uship' (?) to Carolina for ~~$400, so it may still be possible to ship it and remain a good deal. We are no longer strong enough for our long trips, so I'm selling my Eagle. Enjoy /s/ Bob
Hello, MIG Welder buyer:
Below are pix of my Miller MIG welder. I call it my ‘Bus Builder Welder’. Yah, it did just that for my Silver Eagle bus - motor home conversion. Bus is done, along with some recent projects, and I no longer need it. This is a Miller SCP-200C Mig welder, rated at 200 amps, on a very substantial roll around dolly. It is single phase 240 volt, so it is perfect ‘around the house’. It includes a remote wire feeder, with a new 15’ Profax Mig gun with less than two rolls of wire through it. It also includes a spool gun which I use for aluminum. Long cords on everything. The 240vac single phase cord to the wall is about 40’ long, the cables to the carry-around wire feeder are about 40’, and the gun is 15’, so you can get almost 100 feet from the plug in the wall. Everything works great and looks great. The welder has never been in commercial service --hobby only. The gas bottle is not included. There is also a rack on the cart for an argon bottle for the spool gun and aluminum. It is ALL USA --- except for the weld wire, which my welding shop advises me is no longer made in the USA!!!!! We do produce lottssa attorneys and welfare babies, tho.
A welder like this constitutes a remarkable value, but (unfortunate for me) does not bring much $$$$. It sure is a good deal for someone doing any serious welding. And --- It is a going concern, not a hulk from the back room. It is plugged-in, you can try it.
I figure the welder is worth a LOT more than I can get for it. I am asking $999 --- but -- I will listen to offers.
I can load it on your truck OK when you come and get it, here in Carmel.
Please send to me contact information.
Enjoy /s/ Bob
This post is on craigslist Monterey Bay CA. A remarkable bargain for someone at $999. If you want it, let me know and come and get it. About a year ago, I checked shipping it via 'uship' (?) to Carolina for ~~$400, so it may still be possible to ship it and remain a good deal. We are no longer strong enough for our long trips, so I'm selling my Eagle. Enjoy /s/ Bob
Hello, MIG Welder buyer:
Below are pix of my Miller MIG welder. I call it my ‘Bus Builder Welder’. Yah, it did just that for my Silver Eagle bus - motor home conversion. Bus is done, along with some recent projects, and I no longer need it. This is a Miller SCP-200C Mig welder, rated at 200 amps, on a very substantial roll around dolly. It is single phase 240 volt, so it is perfect ‘around the house’. It includes a remote wire feeder, with a new 15’ Profax Mig gun with less than two rolls of wire through it. It also includes a spool gun which I use for aluminum. Long cords on everything. The 240vac single phase cord to the wall is about 40’ long, the cables to the carry-around wire feeder are about 40’, and the gun is 15’, so you can get almost 100 feet from the plug in the wall. Everything works great and looks great. The welder has never been in commercial service --hobby only. The gas bottle is not included. There is also a rack on the cart for an argon bottle for the spool gun and aluminum. It is ALL USA --- except for the weld wire, which my welding shop advises me is no longer made in the USA!!!!! We do produce lottssa attorneys and welfare babies, tho.
A welder like this constitutes a remarkable value, but (unfortunate for me) does not bring much $$$$. It sure is a good deal for someone doing any serious welding. And --- It is a going concern, not a hulk from the back room. It is plugged-in, you can try it.
I figure the welder is worth a LOT more than I can get for it. I am asking $999 --- but -- I will listen to offers.
I can load it on your truck OK when you come and get it, here in Carmel.
Please send to me contact information.
Enjoy /s/ Bob