Announcement Block
As of 12/1/2021, a major update of the forum software was accomplished
Update: 3/7/2024: The Eagles email account at GoDaddy no longer works. I have set up a gmail account as a workaround: eaglesinternational.email at gmail.com
Registration is open to the public (*) and free from any cost or obligation. Please allow up to 36 hours for your application to be processed. If you have problems registering, please email me at: eaglesinternational.email at gmail.com
(*) spambots will be deleted -- only legitimate public applications will be processed.
Reminder: the "quick links" menu offers you the best navigation of this forum -- you need to be registered and logged in to see that menu.
As of 12/1/2021, a major update of the forum software was accomplished
Update: 3/7/2024: The Eagles email account at GoDaddy no longer works. I have set up a gmail account as a workaround: eaglesinternational.email at gmail.com
Registration is open to the public (*) and free from any cost or obligation. Please allow up to 36 hours for your application to be processed. If you have problems registering, please email me at: eaglesinternational.email at gmail.com
(*) spambots will be deleted -- only legitimate public applications will be processed.
Reminder: the "quick links" menu offers you the best navigation of this forum -- you need to be registered and logged in to see that menu.
Mason's 1968 model 05
- beltguy
- Site Admin
- Posts: 2663
- Joined: Wed Oct 08, 2008 4:39 am
- FMCA #: F246286
- Bus Model: 1985 Eagle 10 with Series 60 and Eaton AutoShift 10 speed transmission (SOLD)
- Location: Evergreen, CO
- Contact:
Re: Mason's 1968 model 05
The front engine mount is unique. It was used in IHC class 8 trucks when they sold them with Detroit engines. It was a mount that Newell used for their Detroit applications and it is said to be the best system for that engine. I tried to find the mount when I put my Series 60 in, but could not find one.
I am very jealous about that grinder! For a while I tried to find one, but they were so expensive and I really could not justify the purchase.
I am curious about the pump prime button. That is the first that I have heard of them on a Series 60.
Jim
I am very jealous about that grinder! For a while I tried to find one, but they were so expensive and I really could not justify the purchase.
I am curious about the pump prime button. That is the first that I have heard of them on a Series 60.
Jim
Jim Shepherd
Evergreen, CO
'85 Eagle 10 with Series 60 & Eaton AutoShift 10 speed transmission SOLD
2005 Dodge 2500 with 5.9 Cummins and 6 speed manual 2022 Sunset 28 foot trailer
Bus Project pages: http://beltguy.com/Bus_Project/busproject.htm
Blog: https://beltguy.com/Travelogue/
Email: eaglesinternational.email at gmail.com NOTE this email box is only for general correspondence related to the forum and not technical advice. Technical questions will not receive a response.
Evergreen, CO
'85 Eagle 10 with Series 60 & Eaton AutoShift 10 speed transmission SOLD
2005 Dodge 2500 with 5.9 Cummins and 6 speed manual 2022 Sunset 28 foot trailer
Bus Project pages: http://beltguy.com/Bus_Project/busproject.htm
Blog: https://beltguy.com/Travelogue/
Email: eaglesinternational.email at gmail.com NOTE this email box is only for general correspondence related to the forum and not technical advice. Technical questions will not receive a response.
-
- Posts: 322
- Joined: Thu Jun 14, 2018 11:37 am
- Bus Model: 1968 model 05 Eagle series 60 and B500
- Location: McCook NE
Re: Mason's 1968 model 05
The button on top of the filter will prime the engine when you push it enough times! We run quite a bit of cat equipment, most cats have a similar button on top of the filter.
As for the grinder, our main Ag shop in town went out of business, so they had a big auction....
As for the grinder, our main Ag shop in town went out of business, so they had a big auction....
1968 05 Series 60/B500 swap 2019-2021
1971 05 8v71 Spicer 4 speed parts bus
1971 05 8v71 Spicer 4 speed parts bus
- beltguy
- Site Admin
- Posts: 2663
- Joined: Wed Oct 08, 2008 4:39 am
- FMCA #: F246286
- Bus Model: 1985 Eagle 10 with Series 60 and Eaton AutoShift 10 speed transmission (SOLD)
- Location: Evergreen, CO
- Contact:
Re: Mason's 1968 model 05
In an earlier post you mentioned that the donor bus has a hydraulic fan drive. I assume your Eagle has a belt drive fan.
Over the years, I have heard quite a few negative comments about the hydraulic system but not much negative about the belt system. One issue you may have is the size of hydraulic pump. I assume that the pump supplies both the fan and power steering. If so, you will want to check to see if it sticks out so far that it touches the rear bumper.
I put a hydraulic fan on my charge air cooler (located in the old AC bay). It does the job, but it is pretty messy. The pump that I use is a "two chamber" (not the correct nomenclature) and I had to space the bumper out about a half inch.
Jim
Over the years, I have heard quite a few negative comments about the hydraulic system but not much negative about the belt system. One issue you may have is the size of hydraulic pump. I assume that the pump supplies both the fan and power steering. If so, you will want to check to see if it sticks out so far that it touches the rear bumper.
I put a hydraulic fan on my charge air cooler (located in the old AC bay). It does the job, but it is pretty messy. The pump that I use is a "two chamber" (not the correct nomenclature) and I had to space the bumper out about a half inch.
Jim
Jim Shepherd
Evergreen, CO
'85 Eagle 10 with Series 60 & Eaton AutoShift 10 speed transmission SOLD
2005 Dodge 2500 with 5.9 Cummins and 6 speed manual 2022 Sunset 28 foot trailer
Bus Project pages: http://beltguy.com/Bus_Project/busproject.htm
Blog: https://beltguy.com/Travelogue/
Email: eaglesinternational.email at gmail.com NOTE this email box is only for general correspondence related to the forum and not technical advice. Technical questions will not receive a response.
Evergreen, CO
'85 Eagle 10 with Series 60 & Eaton AutoShift 10 speed transmission SOLD
2005 Dodge 2500 with 5.9 Cummins and 6 speed manual 2022 Sunset 28 foot trailer
Bus Project pages: http://beltguy.com/Bus_Project/busproject.htm
Blog: https://beltguy.com/Travelogue/
Email: eaglesinternational.email at gmail.com NOTE this email box is only for general correspondence related to the forum and not technical advice. Technical questions will not receive a response.
- beltguy
- Site Admin
- Posts: 2663
- Joined: Wed Oct 08, 2008 4:39 am
- FMCA #: F246286
- Bus Model: 1985 Eagle 10 with Series 60 and Eaton AutoShift 10 speed transmission (SOLD)
- Location: Evergreen, CO
- Contact:
Re: Mason's 1968 model 05
It looks like the prime pump is an aftermarket system. Pretty neat.
The toterhome I built had an IHC DT466 and it had a primer pump built into the injector pump. Took a million pumps to prime, but it worked.
Jim
The toterhome I built had an IHC DT466 and it had a primer pump built into the injector pump. Took a million pumps to prime, but it worked.
Jim
Jim Shepherd
Evergreen, CO
'85 Eagle 10 with Series 60 & Eaton AutoShift 10 speed transmission SOLD
2005 Dodge 2500 with 5.9 Cummins and 6 speed manual 2022 Sunset 28 foot trailer
Bus Project pages: http://beltguy.com/Bus_Project/busproject.htm
Blog: https://beltguy.com/Travelogue/
Email: eaglesinternational.email at gmail.com NOTE this email box is only for general correspondence related to the forum and not technical advice. Technical questions will not receive a response.
Evergreen, CO
'85 Eagle 10 with Series 60 & Eaton AutoShift 10 speed transmission SOLD
2005 Dodge 2500 with 5.9 Cummins and 6 speed manual 2022 Sunset 28 foot trailer
Bus Project pages: http://beltguy.com/Bus_Project/busproject.htm
Blog: https://beltguy.com/Travelogue/
Email: eaglesinternational.email at gmail.com NOTE this email box is only for general correspondence related to the forum and not technical advice. Technical questions will not receive a response.
-
- Posts: 322
- Joined: Thu Jun 14, 2018 11:37 am
- Bus Model: 1968 model 05 Eagle series 60 and B500
- Location: McCook NE
Re: Mason's 1968 model 05
Yes, the pump supply's both.
I have not yet decided if I will use the hydraulic fan or not...
Kind of am voting for a belt drive, the hydraulic drive has lots of fussy components
The worst by far so far has been the b500, these hydraulic lines are huge! and hard to handle, not to mention all the at fluid on me and the floor...
P.S. updated my signature! Hehehe
I have not yet decided if I will use the hydraulic fan or not...
Kind of am voting for a belt drive, the hydraulic drive has lots of fussy components
I will have to have a custom drive shaft anyway, we will see what happens on the lengthbeltguy wrote:In an earlier post you mentioned that the donor bus has a hydraulic fan drive. I assume your Eagle has a belt drive fan.
Over the years, I have heard quite a few negative comments about the hydraulic system but not much negative about the belt system. One issue you may have is the size of hydraulic pump. I assume that the pump supplies both the fan and power steering. If so, you will want to check to see if it sticks out so far that it touches the rear bumper.
I put a hydraulic fan on my charge air cooler (located in the old AC bay). It does the job, but it is pretty messy. The pump that I use is a "two chamber" (not the correct nomenclature) and I had to space the bumper out about a half inch.
Jim
The worst by far so far has been the b500, these hydraulic lines are huge! and hard to handle, not to mention all the at fluid on me and the floor...
P.S. updated my signature! Hehehe
1968 05 Series 60/B500 swap 2019-2021
1971 05 8v71 Spicer 4 speed parts bus
1971 05 8v71 Spicer 4 speed parts bus
-
- Posts: 322
- Joined: Thu Jun 14, 2018 11:37 am
- Bus Model: 1968 model 05 Eagle series 60 and B500
- Location: McCook NE
Re: Mason's 1968 model 05
Some pics of progress...
Almost ready to come out!!
Almost ready to come out!!
1968 05 Series 60/B500 swap 2019-2021
1971 05 8v71 Spicer 4 speed parts bus
1971 05 8v71 Spicer 4 speed parts bus
-
- Posts: 322
- Joined: Thu Jun 14, 2018 11:37 am
- Bus Model: 1968 model 05 Eagle series 60 and B500
- Location: McCook NE
Re: Mason's 1968 model 05
Well here she is!
I little longer then the old one, I might say
I little longer then the old one, I might say
1968 05 Series 60/B500 swap 2019-2021
1971 05 8v71 Spicer 4 speed parts bus
1971 05 8v71 Spicer 4 speed parts bus
- DoubleEagle
- Club Member
- Posts: 280
- Joined: Wed Feb 14, 2018 9:26 pm
- Bus Model: 1975 Model 05 Eagle
1982 Model 10 Eagle
1984 Model 10 Eagle
1994 Model 15-45 Eagle - Location: Dayton, Ohio
Re: Mason's 1968 model 05
Mason, you sure have a lot of fabricating ahead of you, but then, you have already done quite a bit on the frame. On my 94 Model 15 there is a substantial sub-frame that runs under the frame rails to reinforce the whole area. It is considerably beefier than the stock Model 05 framework. It might have been a general increase in strength regardless of which engine, but it might have been because of the extra weight of the Series 60 and/or greater tow hitch capacity. I suspect you already have a plan worked out, given what you have done already.
Walter
Dayton, Ohio
1975 Silvereagle Model 05, 8V71, 4 speed Spicer
1982 Eagle Model 10, 6V92, 5 speed Spicer
1984 Eagle Model 10, 6V92 w/Jacobs, Allison HT740
1994 Eagle Model 15-45, Series 60 w/Jacobs, Allison HT746
Dayton, Ohio
1975 Silvereagle Model 05, 8V71, 4 speed Spicer
1982 Eagle Model 10, 6V92, 5 speed Spicer
1984 Eagle Model 10, 6V92 w/Jacobs, Allison HT740
1994 Eagle Model 15-45, Series 60 w/Jacobs, Allison HT746
-
- Posts: 322
- Joined: Thu Jun 14, 2018 11:37 am
- Bus Model: 1968 model 05 Eagle series 60 and B500
- Location: McCook NE
Re: Mason's 1968 model 05
Walter, I would love to see some pictures of your new! series 60 in your eagle.... Is it a factory install? I did not think you could get the HT741 on the series 60 from eagle. But once again, i may be wrong..
I may start some fabrication on the rear end this week, depending on how soon I can get the wiring harness out of the old bus...
The front has been the worst, they (bluebird) managed to fish these huge connectors through the smallest holes Grrrrrrr..
I may start some fabrication on the rear end this week, depending on how soon I can get the wiring harness out of the old bus...
The front has been the worst, they (bluebird) managed to fish these huge connectors through the smallest holes Grrrrrrr..
1968 05 Series 60/B500 swap 2019-2021
1971 05 8v71 Spicer 4 speed parts bus
1971 05 8v71 Spicer 4 speed parts bus
-
- Posts: 322
- Joined: Thu Jun 14, 2018 11:37 am
- Bus Model: 1968 model 05 Eagle series 60 and B500
- Location: McCook NE
Re: Mason's 1968 model 05
Wrong! There is another pump mounted on an auxiliary drive on the lower right side of the transmission. (If you were sitting on the tranny looking at the driveshaft it would be on the right side) You can see it in the last set of pictures i posted. This should make it easier to get rid of the hydraulic drive fan. Speaking of which, the engineering team has officially decided to install a belt drive fan, but still deciding on a fan clutch or not... may have to take a trip to the junk yard...Eagle obsessed wrote:Yes, the pump supply's both.
beltguy wrote:In an earlier post you mentioned that the donor bus has a hydraulic fan drive. I assume your Eagle has a belt drive fan.
Over the years, I have heard quite a few negative comments about the hydraulic system but not much negative about the belt system. One issue you may have is the size of hydraulic pump. I assume that the pump supplies both the fan and power steering. If so, you will want to check to see if it sticks out so far that it touches the rear bumper.
I put a hydraulic fan on my charge air cooler (located in the old AC bay). It does the job, but it is pretty messy. The pump that I use is a "two chamber" (not the correct nomenclature) and I had to space the bumper out about a half inch.
Jim
1968 05 Series 60/B500 swap 2019-2021
1971 05 8v71 Spicer 4 speed parts bus
1971 05 8v71 Spicer 4 speed parts bus