Announcement Block
As of 12/1/2021, a major update of the forum software was accomplished

Update: 3/7/2024: The Eagles email account at GoDaddy no longer works. I have set up a gmail account as a workaround: eaglesinternational.email at gmail.com

Registration is open to the public (*) and free from any cost or obligation. Please allow up to 36 hours for your application to be processed. If you have problems registering, please email me at: eaglesinternational.email at gmail.com
(*) spambots will be deleted -- only legitimate public applications will be processed.

Reminder: the "quick links" menu offers you the best navigation of this forum -- you need to be registered and logged in to see that menu.

HossingAround with the 1980 Eagle Conversion

This is a public forum. This forum will be a place to show your Project Eagle and updates on progress you have made. Please make one thread with your project and put all updates in the same thread. Sorry... Eagles only.
hossingaround
Posts: 5
Joined: Sun Jul 23, 2017 12:16 pm
FMCA #: F472516
Bus Model: 1980 Eagle International Model 10

HossingAround with the 1980 Eagle Conversion

Post by hossingaround »

This is our bus. We bought it sight unseen off of an auction site (we know). But for the price we think it was worth it at $4,200. We've since talked to the owner, who has no reason to sell us on the bus since we already own it, who is very confident that it is mechanically sound. We don't know the history yet, don't know much about it at all other than that it runs and needs (at the very least) new steer tires. We plan to re-do the interior so that we can work from our new "home" and replace the bed (our dog isn't allowed on the bed, but she hasn't figured that out yet and always ends up there, and we're not fighting it anymore and upgrading to king size). We also need to fix the bathroom because it is awkward, and whoever did the kitchen layout clearly didn't cook.
So, for now, this is our bus (pictures from the equipment yard that is currently in possession, posted on the auction site). When we go pick the bus up in two weeks (on our anniversary!) we'll update and post more pictures. Our first order of business is to figure out the tire situation!
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
What have we gotten ourselves into??
Bryan and Christien (pretend it's spelled Christine)
Jim H
Board Member
Board Member
Posts: 241
Joined: Sat Nov 29, 2008 10:21 am
FMCA #: F407926
Bus Model: 1966 Silver Eagle 01,8v92TA,HT740, Southwestern Coach Conversion
1989 Eagle Model 15
Location: Talladeda Township, AR

Re: HossingAround with the 1980 Eagle Conversion

Post by Jim H »

Welcome to the Eagles forum! Nice looking bus.
Jim & Denise
"Casper" Eagle 01 1966
"Eagle 2" Model 15 1989
User avatar
beltguy
Site Admin
Site Admin
Posts: 2663
Joined: Wed Oct 08, 2008 4:39 am
FMCA #: F246286
Bus Model: 1985 Eagle 10 with Series 60 and Eaton AutoShift 10 speed transmission (SOLD)
Location: Evergreen, CO
Contact:

Re: HossingAround with the 1980 Eagle Conversion

Post by beltguy »

First of all Christien and Bryan welcome to our forum.

It sure looks like you stole that puppy :D .

Unless there are very serious rust problems, you have a great start to life with an Eagle.

It looks like the bus is sitting a bit low. If so, you will need to have the Torsilastics adjusted. Not a job for the faint of heart, but the process is well documented here.

Jim
Jim Shepherd
Evergreen, CO
'85 Eagle 10 with Series 60 & Eaton AutoShift 10 speed transmission SOLD
2005 Dodge 2500 with 5.9 Cummins and 6 speed manual 2022 Sunset 28 foot trailer
Bus Project pages: http://beltguy.com/Bus_Project/busproject.htm
Blog: https://beltguy.com/Travelogue/
Email: eaglesinternational.email at gmail.com   NOTE this email box is only for general correspondence related to the forum and not technical advice.  Technical questions will not receive a response.
User avatar
beltguy
Site Admin
Site Admin
Posts: 2663
Joined: Wed Oct 08, 2008 4:39 am
FMCA #: F246286
Bus Model: 1985 Eagle 10 with Series 60 and Eaton AutoShift 10 speed transmission (SOLD)
Location: Evergreen, CO
Contact:

Re: HossingAround with the 1980 Eagle Conversion

Post by beltguy »

You will want to sign up for some type of roadside assistance policy. Many folks recommend Good Sam.

We have both Progressive and AAA heavy duty towing.

Jim
Jim Shepherd
Evergreen, CO
'85 Eagle 10 with Series 60 & Eaton AutoShift 10 speed transmission SOLD
2005 Dodge 2500 with 5.9 Cummins and 6 speed manual 2022 Sunset 28 foot trailer
Bus Project pages: http://beltguy.com/Bus_Project/busproject.htm
Blog: https://beltguy.com/Travelogue/
Email: eaglesinternational.email at gmail.com   NOTE this email box is only for general correspondence related to the forum and not technical advice.  Technical questions will not receive a response.
User avatar
akroyaleagle
Club Member
Club Member
Posts: 486
Joined: Tue Oct 14, 2008 12:11 pm
FMCA #: F180747
Bus Model: 1978 Model 05
Location: Sioux Falls, SD

Re: HossingAround with the 1980 Eagle Conversion

Post by akroyaleagle »

Welcome to the Eagles! You are in the right place.
Joe Laird
'78 05
Sioux Falls, SD
User avatar
luvrbus
Club Member
Club Member
Posts: 2981
Joined: Mon Oct 13, 2008 12:50 pm
FMCA #: F262917
Bus Model: 05

Re: HossingAround with the 1980 Eagle Conversion

Post by luvrbus »

Good find,looks to have a 8v71 with a 5 speed 600 (650) series transmission that will take some practice,just shift it manually with the lever both up shifts and down shifts and you will be fine,enjoy your Eagle
hossingaround
Posts: 5
Joined: Sun Jul 23, 2017 12:16 pm
FMCA #: F472516
Bus Model: 1980 Eagle International Model 10

Re: HossingAround with the 1980 Eagle Conversion

Post by hossingaround »

Thanks for the warm welcome!!

Someone already noted that it looks like it's sitting low... so we checked with the previous owner and it has been converted to airbags.
Bryan was a transportation specialist in the Air Force; he's been trained to drive anything on the ground with wheels, and I'll learn! When talking to the mechanic, he described the transmission like a hydromatic. Bryan seemed to know what that meant...
For the roadside assistance, we've heard lots of bad things about Good Sam. We were planning on signing up for the FMCA Roadside service, any experience with theirs?
We're going to order the Garmin RV GPS off of Amazon before we go to Georgia, and we've picked up a Tire Tracker TPMS.
Things that we want to do before bringing the bus home (we have a couple of days):
Oil Change
Replace Steer Axle Tires
Assess Drive and Tag Axle Tires for Replacement
Replace Belts
Check Fluids
Check Brakes

Anything else y'all can suggest?
ALSO: Bryan would like to go prepared. Are these going to need Metric or Standard tools?

-Christien
What have we gotten ourselves into??
Bryan and Christien (pretend it's spelled Christine)
User avatar
luvrbus
Club Member
Club Member
Posts: 2981
Joined: Mon Oct 13, 2008 12:50 pm
FMCA #: F262917
Bus Model: 05

Re: HossingAround with the 1980 Eagle Conversion

Post by luvrbus »

Road side assistance are all about the same I have Good Sams and Coachnet,I wasn't real happy with Good Sams last week, in Scottsdale we blew a tire on the van and waited 2 hours for the guy to show then he came in a pickup with a dog and no lug wrench to fit the van another hour till he went and found a socket to fit,just be sure they tow buses and not just RV's

As for the shifting part I was just trying to help save him some grief down the road :D
User avatar
beltguy
Site Admin
Site Admin
Posts: 2663
Joined: Wed Oct 08, 2008 4:39 am
FMCA #: F246286
Bus Model: 1985 Eagle 10 with Series 60 and Eaton AutoShift 10 speed transmission (SOLD)
Location: Evergreen, CO
Contact:

Re: HossingAround with the 1980 Eagle Conversion

Post by beltguy »

It sounds like Bryan has a CDL, so he is familiar with pre-trip inspections as described in the CDL regulations. It is imperative that a thorough pre-trip inspection be performed. That is a bit difficult on a bus, but it can be done if you can find a way to get under the bus safely.

Several years ago, I wrote an article for our Eagles International Chapter Newsletter on the subject of inspecting/testing of the air brake system. I have added that article to our website articles page: http://eaglesinternational.net/category/articles.
That article focused on testing that can be done without getting under the bus. However, it is important to check the brake stroke for each axle location. I suspect that your bus has automatic slack adjusters, but they can lock up and fail to work properly.

I am sure that you are aware that in order to release the spring brakes, you have to let the pressure build to full pressure and activate the release button and then give a full service brake application.

Be sure that the folks doing the oil change use 40 wt oil rated for two stroke engines (CF2 as I recall).

Tools will all be standard (no metric). Probably no way to carry enough tools to do much repair on the road.

Be sure to have extra fuel filters and oil.

I am assuming the engine has been started recently. If not, make sure that the rack is not bound up.

Tell us about your planned route.

Jim
Jim Shepherd
Evergreen, CO
'85 Eagle 10 with Series 60 & Eaton AutoShift 10 speed transmission SOLD
2005 Dodge 2500 with 5.9 Cummins and 6 speed manual 2022 Sunset 28 foot trailer
Bus Project pages: http://beltguy.com/Bus_Project/busproject.htm
Blog: https://beltguy.com/Travelogue/
Email: eaglesinternational.email at gmail.com   NOTE this email box is only for general correspondence related to the forum and not technical advice.  Technical questions will not receive a response.
hossingaround
Posts: 5
Joined: Sun Jul 23, 2017 12:16 pm
FMCA #: F472516
Bus Model: 1980 Eagle International Model 10

Re: HossingAround with the 1980 Eagle Conversion

Post by hossingaround »

Thanks, Jim!

We will definitely check out your article. We have it at a shop right now getting new tires and an oil change, and a nose to tail inspection. Apparently the tires are from 1999/2001 and the owner at the yard that we bought it from said the engine looked like it had been rebuilt at some point and the odometer has 20k miles... we were thinking it had rolled over, but maybe that's from a rebuild and it has been sitting for a really long time. It starts and runs well, no blow by, no visible oil leaks.

I'm not sure our route yet, it really depends on what needs to be done to the bus to make it driveable, and if we can "move in" as soon as we get it. We have a good friend that lives in Florida, and would love to meet us in Savannah, and there are a couple of other bus nuts we'd like to meet to get some conversion ideas. Coming back to Texas, after a quick Google check and the discovery of truckrouter.com, we'll most likely travel I-16 to I-85 to I-65 to I-10 to I-35 (Georgia, Alabama, Mississippi, Louisiana, Texas). If anyone is on that route, we'd love to meet up with y'all.
What have we gotten ourselves into??
Bryan and Christien (pretend it's spelled Christine)
Post Reply