Anyone have the part numbers for Model 01 tapered king pins?
Jim
Announcement Block
As of 12/1/2021, a major update of the forum software was accomplished
Update: 3/7/2024: The Eagles email account at GoDaddy no longer works. I have set up a gmail account as a workaround: eaglesinternational.email at gmail.com
Registration is open to the public (*) and free from any cost or obligation. Please allow up to 36 hours for your application to be processed. If you have problems registering, please email me at: eaglesinternational.email at gmail.com
(*) spambots will be deleted -- only legitimate public applications will be processed.
Reminder: the "quick links" menu offers you the best navigation of this forum -- you need to be registered and logged in to see that menu.
As of 12/1/2021, a major update of the forum software was accomplished
Update: 3/7/2024: The Eagles email account at GoDaddy no longer works. I have set up a gmail account as a workaround: eaglesinternational.email at gmail.com
Registration is open to the public (*) and free from any cost or obligation. Please allow up to 36 hours for your application to be processed. If you have problems registering, please email me at: eaglesinternational.email at gmail.com
(*) spambots will be deleted -- only legitimate public applications will be processed.
Reminder: the "quick links" menu offers you the best navigation of this forum -- you need to be registered and logged in to see that menu.
King Pins
- beltguy
- Site Admin
- Posts: 2667
- Joined: Wed Oct 08, 2008 4:39 am
- FMCA #: F246286
- Bus Model: 1985 Eagle 10 with Series 60 and Eaton AutoShift 10 speed transmission (SOLD)
- Location: Evergreen, CO
- Contact:
Re: King Pins
Jim, you don't say which bus, but in either case, you should be able to get the parts from Jefferson (I am pretty sure they are still in business.
There are a couple of threads on the subject of front end rebuild. I think the best is:
http://eagles-international.net/forums/ ... =15&t=3362
Jim
There are a couple of threads on the subject of front end rebuild. I think the best is:
http://eagles-international.net/forums/ ... =15&t=3362
Jim
Jim Shepherd
Evergreen, CO
'85 Eagle 10 with Series 60 & Eaton AutoShift 10 speed transmission SOLD
2005 Dodge 2500 with 5.9 Cummins and 6 speed manual 2022 Sunset 28 foot trailer
Bus Project pages: http://beltguy.com/Bus_Project/busproject.htm
Blog: https://beltguy.com/Travelogue/
Email: eaglesinternational.email at gmail.com NOTE this email box is only for general correspondence related to the forum and not technical advice. Technical questions will not receive a response.
Evergreen, CO
'85 Eagle 10 with Series 60 & Eaton AutoShift 10 speed transmission SOLD
2005 Dodge 2500 with 5.9 Cummins and 6 speed manual 2022 Sunset 28 foot trailer
Bus Project pages: http://beltguy.com/Bus_Project/busproject.htm
Blog: https://beltguy.com/Travelogue/
Email: eaglesinternational.email at gmail.com NOTE this email box is only for general correspondence related to the forum and not technical advice. Technical questions will not receive a response.
-
- Board Member
- Posts: 241
- Joined: Sat Nov 29, 2008 10:21 am
- FMCA #: F407926
- Bus Model: 1966 Silver Eagle 01,8v92TA,HT740, Southwestern Coach Conversion
1989 Eagle Model 15 - Location: Talladeda Township, AR
Re: King Pins
Hello Jim, Ed at Jefferson Bus does not have the pin kit for a Model 01, only a few pieces of a kit. The numbers given to me do not cross in the aftermarket. However, I believe the King pins are the same as some Mack trucks of that vintage. I have the name and phone number of the Spicer-Dana national parts manager. I plan to call him Monday morning, but was just wondering if anyone on the site remembers the aftermarket numbers. My local truck/bus supplier could not seem to cross or come up with a correct part number? BTW, I replaced the Knuckle/cross pins years ago, (from Jefferson)the bushing were egg shaped it you know what I mean. Lol. The kings at that time seemed tight, now I have movement beyond what I feel is normal.
Jim & Denise
"Casper" Eagle 01 1966
"Eagle 2" Model 15 1989
"Casper" Eagle 01 1966
"Eagle 2" Model 15 1989
- gpzzdrm
- Club Member
- Posts: 543
- Joined: Fri Oct 10, 2008 1:25 pm
- FMCA #: F251204
- Bus Model: 1978 - 05 / Cummins ISM 450 / Allison HT740
- Location: Carson City, NV
Re: King Pins
Even though Ed doesn't have the parts, he likely has the parts list from the maintenance manual.
Bill
Bill
1978 05 Eagle with 450HP Cummins ISM / Allison HT740
Started in 1996 and still an in-progress hobby.
Started in 1996 and still an in-progress hobby.